手作り
結婚指輪
Handmade Wedding Bands
In half a day (about 2.5 hours), you can make a wedding ring full of originality by hand. (You can take it home on the same day.)
GURURITO insists on the forging method, so the finished product is sturdy and of a quality that you will love for a lifetime. The couple can personally inscribe commemorative text on the rings free of charge. GURURITO's craftsmen, who normally handle custom-made jewelry, will carefully support the couple through the process, so there is no need to worry if this is your first time doing this. Your wedding ring will be made with the love of your life in mind.
+ diamonds and birthstones from 11,000 yen~
Approx. 2.5 hours
Can be taken home on the same day
Thu-Mon 10:00~ / 14:00~
*Price includes tax.
A day of making wedding rings at GURURITO
Price list
Book a slot
GURURITO'S HANDMADE WEDDING RINGSFlow
Introduction of workshop flow and process
Decide the design
Decide on the design, including ring width, material, surface finish, and engraving.
Engrave
This is the process of engraving letters on the inside of the ring. After practicing, the engraving is done for the real thing. There are capital letters of the alphabet, numbers, and symbols.
Annealing
This is the process of softening metal by heating it with a burner in order to make it easier to round it into the shape of a ring.
Rounding
The metal is rounded into the shape of a ring. A wooden hammer and a tool called a core metal are used.
Soldering
The rounded metals are welded together. Finally, the ring is formed.
Texturing
The surface of the ring is patterned using a hammer or a special machine.
Polishing
Polishing is done using a machine called a micromotor Several different types of abrasives are used to achieve a shiny finish.
Completion
Finally, it is cleaned up and finally completed! Thank you for your hard work. Let's take a commemorative photo of the two of you wearing the rings!
PRICE
Reasonable and straightforward pricing
Basic price according to ring width and size>＋
Price of diamonds and birthstones
(optional)
GURURITO handmade wedding rings have a very simple pricing structure.
This is the total of the base price for each ring width and size, plus the cost of the diamond or birthstone (optional).
Seven different surface finishes and lettering are free of charge.
All prices include tax.
Price list
Slim 2.0mm
Platinum 950
Size 11 101,200yen / piece
Size 16 111,800yen / piece
K18 YELLOW GOLD
Size 11 114,500yen / piece
Size 16 123,400yen / piece
Regular 2.7mm
Platinum 950
Size 11 126,100yen / piece
Size 16 136,700yen / piece
K18 YELLOW GOLD
Size 11 140,600yen / piece
Size 16 149,900yen / piece
Wide 3.3mm
Platinum 950
Size 11 168,300yen / piece
Size 16 180,500yen / piece
K18 YELLOW GOLD
Size 11 180,000yen / piece
Size 16 196,700yen / piece
W-Wide 5.0mm
Platinum 950
Size 11 235,700yen / piece
Size 16 246,900yen / piece
K18 YELLOW GOLD
Size 11 265,000yen / piece
Size 16 218,800yen / piece
Design
Decide on a wedding ring design just for you and your partner.
Materials
2 types
You can choose from two types: standard platinum or yellow gold that blends well with your skin.
Platinum 950
K18 YELLOW GOLD
Textures
Free 7 types
In addition to the standard plain mirror finish, a variety of surface finishes are available to enhance the individuality of the ring, including a Tsuchime finish that uses a hammer to create a pattern on the surface of the ring.
Tsuchime
The surface is Tsuchime with a smooth round hammer. The uneven surface glitters and shines, giving the finish a strong sense of presence.
Nukui
We use hammers processed with stones from the Nukui Riverbank that flows next to our workshop. It has a natural texture like a rough rock surface.
Shirakaba
The pattern is inspired by the trunk of a birch tree, the symbol of Sakuho Town. It is processed by inserting many lines with a pointed hammer.
Snowflake
This texture is inspired by the surface of snow falling on Yatsugatake. A hammer with engraved patterns is used.
Plain
The surface of the ring is polished to a mirror finish until it shines.
Sand blast
The surface of the ring is sprayed with a glassy powder by a machine called a blaster to create a matte finish. It is also called honing.
Hairline
This is a matte-textured finish in which sandpaper is used to create a myriad of gentle lines on the surface of the ring. Also called satin finish.
Twist processing
Plain only
A simple plain ring with a twist for an elegant and timeless design. Twist can be applied only when the surface treatment is plain.
¥5,500-
Engravings
free
The couple can have their initials, anniversary date, etc. engraved on the inside of the wedding band, free of charge.
Example of engraving: 2021.6.18 R to G
Engraving inside the ring
Engraving work is done in the form of a stick.
hand-Tsuchime engraving
Iron stamping is Tsuchime into the steel.
Diamonds & Birthstones
Diamonds and birthstones can be attached to the outside or inside of the ring as an option (for a fee).
The diamond or birthstone option will be delivered at a later date (usually 2 weeks later).
Diamond Add-on
Two types of settings are available: Flash setting and 4-prong setting.
1.3mm ¥11,000-(including stone charge)
Ring width wide 1.7mm ¥13,200-(including stone charge)
Secret Gem Stones
4-prong setting only
1.3mm 11,000-(including stone charge)
January
garnet
February
amethyst
March
aquamarine
April
Diamonds
May
Emerald
June
Moonstone
July
ruby
August
peridot
September
Sapphire
October
Tourmaline
November
blue topaz
December
Tanzanite
Wrappings
2 types
At GURURITO, We Want To Reduce Excessive Packaging As Much As Possible, So We Offer Handmade Ring Cases That Can Be Loved For A Long Time, And Wrapping With Medicine Paper.
Shirakaba box
With lid ¥4,950- ¥3,300- without lid
This shirakaba box is made by an artist who lives in our town, Sakuho-machi. She only use the bark from our local trees. The rings are gently wrapped in deerskin leather that can be used to care for jewelry. Not only as a ring case, but also as a small accessory case. The more you use it, the more you will love it.
Origami wrapping
free
This wrapping is made of Yakuho paper, which can be folded and unfolded many times. The special folding method securely wraps your precious jewelry.
Examples of Production
The following is an introduction to the design and cost of wedding rings produced by GURURITO.
Top：Pt950 Regular Twist
Size 16 147,700yen / piece
Lower：K18YG Slim Twist
Size 11 125,500yen / piece
Top：Pt950 Wide Tsuchime (mirror)
Size 16 180,500yen / piece
Lower：K18YG Regular Tsuchime (mirror)
Size 11 151,600yen / piece
Top：K18YG Regular Snowflake
Size 16 149,900yen / piece
下：Pt950 Slim Snowflake
Size 11 101,200yen / piece
Top：K18YG Wide Shirakaba
16 196,700yen / piece
Lower：Pt950 Regular Shirakaba
Size 11 126,100yen / piece
After care
We will provide a long-lasting after-sales service to ensure that you will enjoy your precious wedding ring for many years to come. Please feel free to contact us.
Ring Size Adjustment
Wedding ring resizing is free of charge for the first time (within one year). (Basic price ¥5,500)
Cleaning
Ring cleaning (ultrasonic cleaning) is free of charge.
Polishing
Re-finishing (re-polishing) can bring back the brilliance of the piece when it was made.
(Normally ¥3,300- Separate estimate for large scratches or deformation)
Re-stoning
If a stone is removed, it can be re-fastened. If the stone is less than one year old and there is no deformation, we will re-fasten it free of charge. In other cases, a separate estimate will be provided.
Gallery
Examples of wedding bands production
-
Handmade Wedding Bands
K18YG
Surface finish：Tsuchime
Diamond
-
Handmade Wedding Bands
K18YG
Surface finish：Shirakaba
Diamond
-
Handmade Wedding Bands
Pt950
Surface finish：snow flake
Birthday stone：Blue topaz
-
Handmade Wedding Bands
Pt950/K18YG
Surface finish：Tsuchime(matte)
Diamond
-
Handmade Wedding Bands
Pt950
Surface finish：tsuchime
Surface finish：Shirakaba
Diamond
More
ぐるりと、
辿り着く。
Access
Business hours 9:30 - 16:00 Closed on Tuesdays and Wednesdays
2908, Takano-cho, Sakuho-cho, Minamisaku-gun, Nagano, Japan
info＠gururitoatelier.jp
TEL 080-2226-5327
Google Map
It takes about 2.5 hours from central Tokyo by Shinkansen bullet train or car.
One hour drive from Karuizawa and Kiyosato area.
Two hours drive from Hakuba area.
For those coming by train
About a 7-minute walk from Haguroshita Station on JR Koumi Line
It takes about 1 hour and 15 minutes from Tokyo Station to Sakudaira Station by the Hokuriku Shinkansen, and then about 35 minutes (9 stops) from Sakudaira Station to Haguroshita Station by JR Koumi Line.
For those coming by car
4 minutes from Sakuho IC on the Chubu Odan Highway
4 parking lots are available.
*We recommend that you use Google Maps as your car navigation system may not show the exact location.
https://g.page/GURURITO
